Return Crystal lamp cleaning method ~ super simple, come and try!

First, how to clean the dust of the crystal chandelier

1. Wipe

When wiping, use a soft soft cloth, dipped in water to wipe back and forth, do not pull, so as not to damage the beads, there are

If not, you can wipe it with kerosene first, and then wash it with water.

2. Cleaning bracket and accessories

Nails and accessories cannot be cleaned with water, as rabbits will damage the protective film, and should be cleaned with alcohol or thinner.

After cleaning, it can be installed directly, because the wet crystal is a very good "vacuum cleaner". when installing

Remember to wear lint-free gloves to keep your fingerprints on the crystal chandelier.

Precautions:

1. Never touch the crystal chandelier with sharp objects.

2. Before disassembling the crystal lamp, the power supply must be cut off for safety and security.

3. When cleaning, do not use corrosive liquids to clean crystal lamps, brackets and accessories.

4. Pay attention to the balance when dismantling the crystal chandelier. Do not disassemble while dismantling, which will easily deform the crystal chandelier.

Second, the maintenance method and care of the crystal chandelier

1. If some dust and dirt are compared with oil, it needs to be wiped off with more water. Usually the position of the lamp tube will be relatively clear

Obviously, this is caused by the heating of the lamp tube. This dirt is just dust, not other substances. In this case, it is recommended to carefully disassemble the crystal chandelier and wipe it with a soft cloth soaked many times. When scrubbing, be careful not to let the metal fittings on the crystal chandelier contact with water for too long, so as not to rust and affect the appearance, and even cause safety hazards.